Products

Application Area: Water and Gas Installations, Non-corrosive Gases and Chemicals, and Compressed Air Installations
Production Range: 3/8" - 12" (17,2 – 323,9 mm)
Production Standards: TS EN 10255, ASTM A53, ISO 65, TS EN 10217-1
Surface Protection: Protective Oil, Hot Dip Galvanizing, 3 Layer of Polyethylene Coating, 3 Layer of Polypropylene Coating, Water Based Painting, Epoxy Coating
Finishing Operations: Plain End, Bevelled , Threaded and Coupled, Roll Grooved, Swaged


WATER PIPES

MEDIUM SERIE
TS EN 10255
HEAVY SERIE
TS EN 10255
TYPE L
TS EN 10255
TYPE L 1
TS EN 10255
TYPE L 2
TS EN 10255
Water Pipes
TS EN 10217-1
ASTM A53
ASTM A53

Application Area: Fire Protection Sprinkler Systems
Production Range: 1/2" - 10" (21,3 – 273,1 mm)
Production Standards: TS EN 10255, ASTM A53, ASTM A795
Surface Protection: Hot Dipped Galvanized, Water Based Painting, Epoxy
Finishing Operations: Plain End (Square Cut or Bevelled), Threaded and Coupled, Bell & Spigot, Roll Grooved, Swaged
*UL and FM approved Fire Protection Sprinkler System Pipes are used.

FIRE PIPES
GROOVED PIPES

Application Area: Natural Gas Lines, LPG Installations,Petroleum and Petrochemical Transmission Lines
Production Range: 1/2" - 12 3/4" (21,3 – 323,9 mm)
Production Standards: API 5L PSL1, API 5L PSL2, TS EN ISO 3183
Surface Protection: Protective Oil,3 Layer of Polypropylene Coating, 3 Layer of Polyethylene Coating, Water Based Painting, Epoxy Lining
Finishing Operations: Plain End (Square Cut or Bevelled)


OIL AND NATURAL GAS LINE PIPES

Application Area: Boiler Tubes, High Temperature Pressure Pipes, Water Well Casing and Tubing Installations
Production Range: 3/8" - 12" (17,2 – 323,9 mm)
Production Standards: TS EN 10217-1, TS EN 10217-2, TS EN 10217-3, ASTM A 589
Surface Protection: Protective Oil, Water Based Painting, 3 Layer of Polyethylene Coating, 3 Layer of Polypropylene Coating, Water Based Painting
Finishing Operations: Plain End (Square Cut or Bevelled)


EN 10217-1
EN 10217-2

Application Area: Natural Gas and Oil Well Casing and Tubing Installations
Production Range: 2 3/8" - 10 3/4" (60,3 – 273,1 mm)
Production Standards: API 5CT
Surface Protection: Protective Oil, Water Based Painting, 3 Layer of Polyethylene Coating, 3 Layer of Polypropylene Coating, Water Based Painting, Epoxy
Finishing Operations: Plain End (Square Cut or Bevelled)


CASING PIPES
API 5 CT

Application Area: Construction Industry
Production Range: 133 mm outside diameter, 4, 4-5 mm wall thickness
Production Standards: EN 10217-1, EN 10217-3
Surface Protection: Protective Oil,3 Layer of Polypropylene Coating, 3 Layer of Polyethylene Coating, Water Based Painting, Epoxy Coated
Finishing Operations: Plain End


CONCRETE PUMP PIPES
EN 10217-1